Description
Place a pair of Evoke 30 floor uprights in the living room and everyone will hear and see that you have taste.
These two-and-a-half speaker systems strike the balance between compactness and restraint, and an unprecedented enthusiasm for wide-eyed music. Let’s take it from the top, At the top of the speaker is the all new Cerotar 28mm precision coated soft dome tweeter. And it is one of our most advanced ever.
Our engineers looted some of our most celebrated technologies – including ingenious airflow systems from the award-winning Esotar 40th anniversary tweeter, the precision coating found in the Contour range and the Hexis from the new Confidence series (more on this in a bit) – and combined them into a new design especially for the Evoke family.
New Cerotar Tweeter
The Cerotar is powered by a newly designed strontium carbonate ferrite + ceramic magnet system and features the Confis Hexis inner dome. This ingenious little wedged device sits right behind the soft tweeter diaphragm and reduces unwanted resonances while smoothing the overall frequency response. The result is smoother treble, better detail and even more clarity – meaning you can listen to the wee hours of the morning without getting tired.
The low-down woofers
Evoke 30’s dual 14-inch Esotec + mid-bass drivers are made from MSP (Magnesium Silicate Polymer), a material we’ve used for our woofer membranes since Dynaudio since 1977. It offers just the right combination of lightness, stiffness and damping balancing the needs of powerful yet precise bass performance with crisp, detailed mids.
Each speaker cone is made from a single piece of MSP. This makes them just the right amount of rigid – and means far less physical distortion while playing. It also gives a super-solid physical connection to the fiberglass voice coil former on the back (it’s glued directly under the Balance Ribs you see around the center), meaning more of the coil’s kinetic energy is transferred to the diaphragm.
Evoke 30’s 52mm voice coils are made of aluminum – providing the right combination of weight and wrap height to balance the bass and midrange. It provides optimal movement while maintaining the correct mid-range grip for a perfectly integrated performance.
Nomex spiders keep everything centered and moving as they should, while the new Contour-derived surround allows a longer throw ratio for more punch. And, like the Cerotar tweeter, Evoke 30’s woofers are both powered by ceramic ferrite + magnets for greater control, finesse and power.
Fair Danish design
Evoke 10 is available in four beautiful finishes: Black High Gloss, White High Gloss, Walnut Wood and Blonde Wood. The shiny versions are really alone: new painting techniques have resulted in a luscious, almost glass-like finish. The wood versions use a tactile, open, natural veneer for a warm, dark tone or a light apricot look.
You may notice that you don’t see any mounting screws. Evoke has simple, clean trim rings that emphasize the cabinet finish as well as the moving parts of the drivers. The rings are cast in one piece, with the surface finish embedded in the casting process – so what we make is what you get.
Clean, beautiful and fair. How very Danish.
It means you can take them with you when you move… and we trust you will enjoy them for a lifetime. But first…. Come and listen to them at Botman Sound & Vision!
